Thermal Energy and Biomass Consumption Assessment of Traditional Sugar Palm Fruit Boiling: Integrating Local Knowledge and Quantitative Process Analysis
DOI:
https://doi.org/10.62411/jimat.v1i1.18668Keywords:
Arenga pinnata, Biomass energy, Thermal characterization, Specific fuel consumption, Local knowledgeAbstract
Traditional sugar palm fruit (Arenga pinnata) processing involves prolonged boiling, which may require substantial biomass fuel consumption and careful heat management. In small-scale production communities, boiling practices are commonly guided by experiential knowledge, including visual flame assessment, fuel-feeding routines, and sensory indicators of product readiness. However, these practices are rarely documented alongside quantitative measurements of thermal behavior and fuel consumption. This study aims to characterize traditional sugar palm fruit boiling practices and establish a baseline for biomass energy use by integrating local knowledge documentation with process-level thermal measurements. The proposed study focuses on small-scale sugar palm fruit processors in Kampung Kokolaka, Jatirejo, Gunungpati, Semarang, Indonesia. A mixed-methods approach combines field observations, semi-structured interviews, and measurements of biomass consumption, boiling duration, water temperature, fuel moisture content, and processed fruit mass. Specific fuel consumption is calculated as the ratio of biomass consumed to the mass of fruit processed, with additional moisture-adjusted comparisons where appropriate. Descriptive statistics and thermal profile analysis are used to investigate process variability and identify potential energy-related limitations. Local operating practices are interpreted alongside measured process characteristics to identify parameters relevant to future appropriate technology development. The study is expected to provide an empirically grounded description of traditional boiling practices, a reproducible baseline measurement framework, and preliminary technical requirements for community-oriented thermal process improvement.References
International Organization for Standardization, Clean cookstoves and clean cooking solutions—Harmonized laboratory test protocols—Part 1: Standard test sequence for emissions and performance, safety and durability, ISO 19867-1:2018, Geneva, Switzerland, 2018. [Online]. Available: https://www.iso.org/standard/66519.html.
Clean Cooking Alliance, Water Boiling Test, Version 4.2.3. Washington, DC, USA, 2014. [Online]. Available: https://cleancooking.org/protocols/.
World Health Organization, WHO Guidelines for Indoor Air Quality: Household Fuel Combustion. Geneva, Switzerland: WHO, 2014. [Online]. Available: https://www.who.int/publications-detail-redirect/9789241548885.
Food and Agriculture Organization of the United Nations, Unified Bioenergy Terminology. Rome, Italy: FAO, 2004. [Online]. Available: https://www.fao.org/4/j4504e/j4504e08.htm.
International Electrotechnical Commission, Thermocouples—Part 1: EMF Specifications and Tolerances, IEC 60584-1:2013, Geneva, Switzerland, 2013. [Online]. Available: https://webstore.iec.ch/en/publication/2521.
International Organization of Legal Metrology, Non-automatic Weighing Instruments—Part 1: Metrological and Technical Requirements—Tests, OIML R 76-1:2006, Paris, France, 2006. [Online]. Available: https://www.oiml.org/en/publications/recommendations/76/2006/.
J. W. Creswell and V. L. Plano Clark, Designing and Conducting Mixed Methods Research, 3rd ed. Thousand Oaks, CA, USA: SAGE Publications, 2018.
V. Braun and V. Clarke, “Using thematic analysis in psychology,” Qualitative Research in Psychology, vol. 3, no. 2, pp. 77–101, 2006, doi: 10.1191/1478088706qp063oa.
R. Gunawan, U. G. Ramadhan, J. Iskandar, and R. Partasasmita, “Local knowledge of utilization and management of sugar palm (Arenga pinnata) among Cipanggulaan People of Karyamukti, Cianjur, West Java, Indonesia,” Biodiversitas, vol. 19, no. 1, pp. 93–105, 2018, doi: 10.13057/biodiv/d190115.
A. Haryoso, E. A. M. Zuhud, A. Hikmat, A. Sunkar, and D. Darusman, “Ethnobotany of sugar palm (Arenga pinnata) in the Sasak Community, Kekait Village, West Nusa Tenggara, Indonesia,” Biodiversitas, vol. 21, no. 1, pp. 117–128, 2020, doi: 10.13057/biodiv/d210116.
E. A. T. Yuntenwi, N. MacCarty, D. Still, and J. Ertel, “Laboratory study of the effects of moisture content on heat transfer and combustion efficiency of three biomass cook stoves,” Energy for Sustainable Development, vol. 12, no. 2, pp. 66–77, 2008, doi: 10.1016/S0973-0826(08)60430-5.
J. Jetter, Y. Zhao, K. R. Smith, B. Khan, T. Yelverton, P. DeCarlo, and M. D. Hays, “Pollutant emissions and energy efficiency under controlled conditions for household biomass cookstoves and implications for metrics useful in setting international test standards,” Environmental Science & Technology, vol. 46, no. 19, pp. 10827–10834, 2012, doi: 10.1021/es301693f.
C. L’Orange, M. DeFoort, and B. Willson, “Influence of testing parameters on biomass stove performance and development of an improved testing protocol,” Energy for Sustainable Development, 2012, doi: 10.1016/j.esd.2011.10.008.
C. M. Quist, M. R. Jones, and R. S. Lewis, “Influence of variability in testing parameters on cookstove performance metrics based on the water boiling test,” Energy for Sustainable Development, 2020, doi: 10.1016/j.esd.2020.07.006.
E. Chica and J. F. Pérez, “Development and performance evaluation of an improved biomass cookstove for isolated communities from developing countries,” Case Studies in Thermal Engineering, vol. 14, Art. no. 100435, 2019, doi: 10.1016/j.csite.2019.100435.
K. M. Lask, K. Booker, T. Han, J. Granderson, N. Yang, C. Ceballos, and A. J. Gadgil, “Performance comparison of charcoal cookstoves for Haiti: Laboratory testing with Water Boiling and Controlled Cooking Tests,” Energy for Sustainable Development, vol. 26, pp. 79–86, 2015, doi: 10.1016/j.esd.2015.02.002.
W. M. Champion, M. D. Hays, C. Williams, L. Virtaranta, M. Barnes, W. Preston, and J. J. Jetter, “Cookstove emissions and performance evaluation using a new ISO protocol and comparison of results with previous test protocols,” Environmental Science & Technology, vol. 55, no. 22, pp. 15333–15342, 2021, doi: 10.1021/acs.est.1c03390.
M. Johnson, R. Edwards, V. Berrueta, and O. Masera, “New approaches to performance testing of improved cookstoves,” Environmental Science & Technology, vol. 44, no. 1, pp. 368–374, 2010, doi: 10.1021/es9013294.
D. M. McNeish and J. R. Harring, “Clustered data with small sample sizes: Comparing the performance of model-based and design-based approaches,” Communications in Statistics—Simulation and Computation, vol. 46, no. 2, pp. 855–869, 2017, doi: 10.1080/03610918.2014.983648.
C. Leyrat, K. E. Morgan, B. Leurent, and B. C. Kahan, “Cluster randomized trials with a small number of clusters: Which analyses should be used?” International Journal of Epidemiology, vol. 47, no. 1, pp. 321–331, 2018, doi: 10.1093/ije/dyx169.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Muhamad Akrom, Gustina Alfa Trisnapradika, Harun Al Azies

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing Terms
Authors publishing in the Journal of Multiscale Materials Informatics (JIMAT) agree to the following terms:
1. Copyright Ownership
Authors retain copyright of their published articles.
2. First Publication Rights
Authors grant JIMAT a non-exclusive right of first publication and the right to identify itself as the original publisher.
3. Open Access License
Articles are published under the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits sharing, reproduction, distribution, and adaptation, including commercial use, provided appropriate credit is given, a link to the license is included, and any changes are indicated.
4. Author Rights
Authors may share, archive, and distribute their published work, including through institutional repositories and academic platforms, with appropriate acknowledgment of its original publication in JIMAT.
