Analisis Kualitas Sistem Informasi Menggunakan Metode McCall: Studi Kasus SPON MDP
DOI:
https://doi.org/10.33633/tc.v21i2.5970Keywords:
SPON, Kualitas Sistem Informasi, McCall, MDPAbstract
Penelitian ini mengukur kualitas sistem informasi akademik dengan studi kasus Sistem Pembelajaran Online (SPON) Universitas MDP. Setelah melakukan studi literatur, penelitian ini dimulai dengan menyebarkan kuesioner yang disusun berdasarkan metode McCall. Metode McCall merupakan salah satu dari metode-metode yang dapat digunakan untuk mengukur kualitas perangkat lunak. Selanjutnya hasil dari pengisian kuesioner diuji nilai validitas dan reliabilitasnya untuk mendapatkan variabel-variabel dan indikator-indikator yang valid dan reliabel. Variabel dan indikator tersebut selanjutnya digunakan untuk mengukur nilai kualitas (Fa) dari setiap variabel. Pengukuran tersebut dimulai dengan proses pembobotan variabel dan indikator melalui kuesioner yang diisi oleh pakar. Pembobotan tersebut menggunakan skala 0,1 sampai dengan 0,5 untuk setiap variabel kebenaran, keandalan, efisiensi, integritas, dan penggunaan beserta indikatornya masing-masing. Hasil perhitungan metode McCall terhadap kualitas SPON menunjukkan nilai kualitas sebesar 44,69%. Nilai kualitas tersebut berada pada rentang 41-60% yang menunjukkan angka interpretasi cukup. Artinya, berdasarkan perhitungan kualitas sistem informasi menggunakan metode McCall, sistem informasi akademik SPON merupakan sistem yang cukup berkualitas.References
Imelda dan M. Erik, “PERANCANGAN SISTEM INFORMASI AKADEMIK PADA SEKOLAH DASAR NEGERI SUKAJADI 9 BANDUNG,” J. Teknol. dan Inf., vol. 2, no. 1, hal. 45–59, 2012, doi: https://doi.org/10.34010/jati.v2i1.772.
Peter Salim dan Yenny Salim, Kamus Bahasa Indonesia Kontemporer, 3 ed. Jakarta, 2002.
A. Jafeez-Baig dan R. Gururajan, “Preliminary Study to Investigation the Determinants that Effect IS/IT Outsourcing,” J. Inf. Commun. Technol. Res., vol. Vol. 1 (2), no. 2, hal. 48–55, 2011, [Daring]. Tersedia pada: https://eprints.usq.edu.au/20496/3/Hafeez-Baig_Gururajan_IJICT_2011_PV.pdf.
S. N. Soudani, “The Usefulness of an Accounting Information System for Effective Organizational Performance,” Int. J. Econ. Financ., vol. 4, no. 5, hal. 136–145, 2012, doi: 10.5539/ijef.v4n5p136.
J. A. Mccall, P. K. Richards, dan G. F. Walters, “Factors in Software Quality Concept and Definitions of Software Quality,” New York, 1977. [Daring]. Tersedia pada: https://apps.dtic.mil/dtic/tr/fulltext/u2/a049014.pdf.
R. S. Wahono, “TEKNIK PENGUKURAN KUALITAS PERANGKAT LUNAK,” 2006. https://romisatriawahono.net/2006/06/05/teknik-pengukuran-kualitas-perangkat-lunak/ (diakses Mar 02, 2022).
A. Hidayati, E. Oktariza, F. Rosmaningsih, dan S. A. Lathifah, “Analisa Kualitas Perangkat Lunak Sistem Informasi Akademik Menggunakan McCall,” Multinetics, vol. 3, no. 1, hal. 48, 2017, doi: 10.32722/multinetics.vol3.no.1.2017.pp.48-53.
Andria, Kusrini, dan A. Amborowati, “Evaluasi Kualitas Web Portal STT Dharma Iswara Madiun Menggunakan Metode McCall,” J. Ekon. dan Tek. Inform., vol. 5, no. 9, hal. 33–43, 2016.
A. Mulyanto, “Pengujian Sistem Informasi Akademik Menggunakan McCall’s Software Quality Framework,” J. Inform. Sunan Kalijaga, vol. 1, no. 1, hal. 47–57, 2016.
K. Musa dan J. Alkhateeb, “QUALITY MODEL BASED ON COTS QUALITY ATTRIBUTES,” Int. J. Softw. Eng. Appl., vol. 4, no. 1, 2013, doi: 10.5121/ijsea.2013.4101.
N. Anisa, “5 Faktor Software Quality Pada Product Operation,” 2021. https://sis.binus.ac.id/2021/03/25/5-faktor-software-quality-pada-product-operation/ (diakses Mar 11, 2022).
F. Rahmawati, M. A. Musyafa, M. D. Fauzi, dan A. Mulyanto, “Quality Testing of Order Management Information System Based on Mccall’s Quality Factors,” IJID (International J. Informatics Dev., vol. 5, no. 2, hal. 12, 2016, doi: 10.14421/ijid.2016.05203.
A. S. C. M, K. Aelani, dan F. D. J. S, “Pengujian Kualitas Website menggunakan Metode McCall Software Quality ( Studi Kasus smkn4bdg.sch .id ),” Jt. (Journal Inf. Technol., vol. 03, no. 1, hal. 25–32, 2021, doi: https://doi.org/10.47292/joint.v3i1.43.
T. Yamane, “Statistics: An Introductory Analysis,” New York: Harper and Row, 1967. .
L. Cohen, L. Manion, dan K. Morrison, Research Methods in Education, 6th ed. New York: Routledge Taylor & Francis Group, 2007.
Mahmud, Metode Penelitian Pendidikan. Bandung: CV. Pustaka Setia, 2011.
H. Latan dan I. Ghozali, Partial Least Squares: Concept, Technique, and Application SmartPLS 2.0 M3. Semarang: Badan Penerbit Universitas Diponegoro, 2012.
T. Sugiyono, “Uji Validitas & Uji Reliabilitas,” unpas.ac.id, 2016. .
R. E. Al-Qutaish, “Quality Models in Software Engineering Literature: An Analytical and Comparative Study,” J. Am. Sci., vol. 6, no. 3, hal. 166–175, 2010.
C. Juliane, R. Dzulkarnaen, dan W. Susanti, “Metode McCall ’ s untuk Pengujian Kualitas Sistem Informasi Administrasi Tugas Akhir (SIATA),” J. RESTI, vol. 3, no. 3, hal. 488–495, 2019, doi: https://doi.org/10.29207/resti.v3i3.1170.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Ahmad Farisi, Hendi Saputra

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
License Terms
All articles published in Techno.COM Journal are licensed under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This means:
1. Attribution
Readers and users are free to:
-
Share – Copy and redistribute the material in any medium or format.
-
Adapt – Remix, transform, and build upon the material.
As long as proper credit is given to the original work by citing the author(s) and the journal.
2. Non-Commercial Use
-
The material cannot be used for commercial purposes.
-
Commercial use includes selling the content, using it in commercial advertising, or integrating it into products/services for profit.
3. Rights of Authors
-
Authors retain copyright and grant Techno.COM Journal the right to publish the article.
-
Authors can distribute their work (e.g., in institutional repositories or personal websites) with proper acknowledgment of the journal.
4. No Additional Restrictions
-
The journal cannot apply legal terms or technological measures that restrict others from using the material in ways allowed by the license.
5. Disclaimer
-
The journal is not responsible for how the published content is used by third parties.
-
The opinions expressed in the articles are solely those of the authors.
For more details, visit the Creative Commons License Page:
? https://creativecommons.org/licenses/by-nc/4.0/